Updating firmware dap1360
default DAP-1360 IP is 192.168.0.50 username : admin password : change your PC IP address to 192.168.0(e.g.
192.168.0.2) from there you may choose wizard or manual configuration.
This means you will lose all of the changes you made since you got the router.
Make sure to write down any things you've changed, so you can change them back after the reset.
Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. PUT LAN CABLE FIRST FROM THE ROUTER TO YOUR PC / LAPTOP.
One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. FROM CONTROL PANEL CLICK NETWORK CONNECTION THEN RIGHT CLICK THE CONNECTION THEN STATUS/SUPPORTYOU CAN SEE DEFAULT GATEWAY COPY HE NUMBERS, OPEN INTERNET EXPLORER PUT THE NUMBERS CORRECTLY TO IE WEB BROWSER THEN ENTER.
If the default password on the D-Link has been changed then-To reset the D-Link back to the default settings -Press and hold the RESET button at the back of the router with the power ON untilthe LEDs flash at the time the release the RESET button.
Du customer care number for fixed home service is 043905555.Best thing to do is do a hard reset and then update your firmware to the latest version.just make sure that you belong with in the same IP range.To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- Most likely your access point is losing connection with your router.I looked into buying one of these, but decided against it when I saw on some message boards its problem with connectivity.
The D-Link® Xtreme N Dual Band USB Adapter (DWA-160) is the latest addition to the award-winning Xtreme N product family.